Belzona 1818 is a fast curing, surface tolerant, abrasion resistant system ideal for patch repairs on surfaces subject to high erosion and abrasive environments. Its fast curing properties results in minimal downtime for damaged equipment, and the product can experience full mechanical loading in as little as two hours after application. This material has built in surface tolerant technology, enabling it to bond tenaciously onto steel substrates even when surface preparation is minimal or if the substrate is heavily contaminated with oil or water. The product can even be applied and cured underwater. Supplied as a two-part system, Belzona 1818 is easy to mix and apply without the need for specialist tools and can be applied direct to the substrate with no need for an additional primer.
Excellent Abrasion Resistance
Belzona 1818 exhibits outstanding abrasion resistance and can withstand erosion up to temperatures of 80°C (176°F).
Surface Tolerant
Belzona 1818 can be applied directly onto manually prepared, wet or oil contaminated surfaces and can even be applied underwater.
Fast Curing
Belzona 1818 is fast curing ensuring a quick return to service. Depending on ambient temperatures, the product can experience full mechanical loading after two hours.
Easy to Mix and Apply
No specialist tools required for mixing or application.
Applications for 1818:
Slurry pumps
Grinding mills
Screw conveyors
Chutes and hoppers
Hydrocyclones
Wear plates
Grit pumps
Agitator shafts, hubs and blades
Dust extraction pipe work
Buy Belzona 1818 in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Belzona in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
