A lightweight epoxy repair composite for rebuilding damaged vertical and overhead concrete and masonry surfaces. This high-build concrete repair material can be applied up to 12.7 cm (5 inches) thick on vertical surfaces and up to 7.6 cm (3 inches) thick on overhead surfaces without the use of shuttering during cure and only minimal support during the application. This solvent-free epoxy repair composite is non-porous and does not absorb water or chemicals. It provides excellent carbonation resistance and withstands extreme weather conditions. Generally, concrete must be left to cure for a minimum of 28 days. Belzona 4141 (Magma-Build) in comparison will achieve a full mechanical cure at 25°C (77°F) within 12 hours, and full chemical cure in 3 days.
Can be tinted to colour match the original masonry surface
Can be feather-edged
Hi-build application in vertical and overhead locations
No shrinkage irrespective of the thickness applied
Reduces the requirement for shuttering
Excellent chemical resistance against a wide range of chemicals
Easy to mix and apply with no specialist tools and can be used in small quantities when required
Resistant to environmental attack
Reduced health and safety risks as it is solvent-free
Excellent bonding to all masonry surfaces including concrete, brick, marble and stone
Repair of spalled or damaged concrete areas and weathered stonework, particularly for vertical or overhead applications
Window sill, lintel and column repair
Repair of damaged overhead areas such as archways and bridges
Refurbishment of decorative moldings and other cosmetic repairs
Buy Belzona 4141 (Magma-Build) in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Belzona in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
