Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2014-2 is a two-part, room temperature cure, thixotropic paste adhesive with very low shrinkage. The main purpose for this adhesive is to be used for bonding metals, electronic components, GRP structures or other items where the temperature is higher than normal in an aggressive environment. The durability and strength of the adhesive is dependent on the proper surface treatment of the substrates needed to be bonded. The surfaces need to be cleaned and degreased to remove all the traces of oil, grease and dirt. The most durable and strongest joints are obtained by chemically etching or mechanically abrading the surfaces. The lap shear strength will depend on the material that is being bonded.
Resistant to chemicals
Temperature resistant
KIWA approval (drinking water)
Bonding of filter media to end cap
Assembly of electronic fuses
Bonding of composite pipes in marine
Potting of connectors
Bonding of railway insulation rods
Araldite 2014 A is a beige paste that needs 100 parts by weight and Araldite B is a grey paste that needs 50 parts by weight, when mixed thoroughly together it creates a grey thixotropic paste. The adhesive can be applied either manually or robotically. A layer of Araldite 2014 epoxy .002 to .004 inches thick will give the greatest lap shear strength to the joints being bonded.
The pot life of 100 grams of material is approximately 80 minutes at a temperature of 77 degrees Fahrenheit. Once the mixture is applied the joints should immediately secured in a fixed position to allow it to cure. It will take approximately 3 hours for the adhesive to cure at a temperature of 73 degrees Fahrenheit. The shelf life of Araldite 2014 is roughly 3 years between temperatures of 36 to 104 degrees Fahrenheit. Expiration date will be listed on the label. It is extremely important to understand the proper application methods and any potential health risks this material may cause. For more information regarding this material, refer to the Araldite 2014 MSDS.
Buy Araldite 2014-2 in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Araldite in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
Araldite Standard is a super strong gap filling epoxy adhesive for household, workshop, industry, repairs. Water proof and chemical resistant. Bonds most materials to themselves or to one another specially to metal, wood, glass, ceramics, rigid plastics and concrete. Cures fast at room temperature 18 – 24 Degree C. Enables rapid but durable assembly and repair work. cures slowly at temperature down to 5 degree c. Apply on clean and dry surface.
