Belzona 5711 is a high-performance, easy to apply system specially designed for the repair of erosion and impact damage on the leading edges of wind turbine blades. Belzona 5711 is supplied in a cartridge format, making it easy to apply, ideally suited for applicators using rope access. This product has a good working life allowing it to be perfectly contoured to the leading edge, removing the need for sanding eliminating a step in the repair process. Belzona 5711 cures quickly and can be directly overcoated with Belzona 5721 in 30 minutes at 20°C/68°F, without the need for any additional preparation. Belzona 5711 and Belzona 5721 provide a long-lasting repair and protection solution for your blades, minimising downtime, and maximising your turbines output.
Rapid curing system which can be overcoated in 30 minutes, and is fully cured within 60 minutes at 20 °C/ 68 °F.
Cartridge packaging eases in-situ repair and is compatible with standard single component sealant/ caulking guns.
Can be perfectly contoured, and removes the need for sanding, therefore simplifying the application process.
Single product, suitable for use between 5-40 °C/ 41-104 °F, and up to 85% RH.
Low hazard and solvent free. Cartridge format avoids the need to handle and mix individual components.
Specifically designed for leading edge protection, a combination of Belzona 5711 and Belzona 5721 can repair damage, and offer long lasting protection against rain erosion and impact damage.
Repair of the leading edge on wind turbine blades.
Repairs on to similar types of equipment, including fan blades
Buy Belzona 5711 in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Belzona in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
