Adhesive dampening greases of medium to high shear viscosity. CATENERA KSB 6, 8, 12 are adhesive dampening greases based on synthetic hydrocarbon, ester and paraffin oil. They contain silicate as thickener. In the food and pharmaceuticals industries, CATENERA KSB 8 may be preferably used for applications where technically unavoidable contact with the food product cannot be excluded. CATENERA KSB 8 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of CATENERA KSB 8 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. Content: 1kg can Available in 50g tube, 400g cartridge, 1kg can, 25kg bucket
More comfortable operation (haptics) of mechanical components as friction points are dampened by the lubricant
Better component function e.g. due to good adhesion retaining the lubricant at the friction point
CATENERA KSB 8 is certified according to NSF ISO 21469, supporting the compliance with the hygienic requirements in your production.
CATENERA KSB greases are used for friction points requiring high mechanical dampening and good adhesion, e.g. low-speed rolling and plain bearings, small gears, threaded spindles, eyepieces and binoculars.
CATENERA KSB is available in three shear viscosity grades in order to meet dampening and adhesion requirements.
For even higher shear viscosities we refer to the Klubersynth RA greases.
CATENERA KSB greases can be applied by brush, spatula, grease gun, automatic metering systems for small quantities, grease cartridge and the usual metering systems. Owing to the many different elastomer and plastic compositions their compatibility has to be checked prior to series application.
Article number
007003
NSF-H1 registration
113 755
Chemical composition, type of oil
paraffinic mineral oil
Chemical composition, type of oil
ester oil
Chemical composition, thickener
silicate
Lower service temperature
-30 °C / -22 °F
Upper service temperature
120 °C / 248 °F
Color space
beige
Texture
fibrous
Texture
homogeneous
Appearance
almost transparent
Density at 20 °C
approx. 0.93 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
260 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
300 x 0.1 mm
Shear viscosity at 25 °C, shear rate 300 s-1, equipment:
rotational viscometer, lower limit value
6 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer,
upper limit value
10 000 mPas
Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the
unopened original container, approx.
12 months
Buy Kluber CATENERA KSB 8 Adhesive dampening grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber CATENERA KSB 8 Adhesive dampening grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.