Dynamically light, long-term lubricating grease ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion Content: Can 1 kg Available in Tube 45 g, Cartridge 400 g, Can 1 kg, Bucket 25 kg
Long service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings
Tried-and-tested for many years, especially at high speeds and low temperatures
Low heating-up of bearings due to low lubricant friction leading to longer service lives
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment
Article number
4013
Chemical composition, thickener
lithium soap
Chemical composition, type of oil
mineral oil
Chemical composition, type of oil
ester oil
Lower service temperature
-50 °C / -58 °F
Upper service temperature
120 °C / 248 °F
Colour space
yellow
Texture
homogeneous
Texture
short-fibred
Density at 20 °C
approx. 0,88 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
265 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
295 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 15 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 3,5 mm²/s
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value
4 000 mPas
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value
2 000 mPas
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water
0 corrosion degree
Speed factor (n x dm)
approx. 1 000 000 mm/min
Low-temperature torque, IP 186, – 60 °C, start
<= 1 000 mNm
Low-temperature torque, IP 186, -60 °C, running
<= 100 mNm
Drop point, DIN ISO 2176, IP 396
>= 190 °C
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.
36 months
Buy Kluber ISOFLEX LDS 18 Special A Long-term lubricating grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber ISOFLEX LDS 18 Special A Long-term lubricating grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.