Kluber ISOFLEX PDL 300 A High-performance grease for rolling bearings operating at low temperatures | N° 004074 ISOFLEX PDL 300 A is a synthetic high-performance grease for low temperatures. It consists of ester oil and lithium soap. Owing to its well-balanced texture and consistency, this special grease ensures uniformly low starting and running torques. Temperature range: -70°C to +110°C Volume: t1kg can Also available in: 25kg bucke
For low temperatures
Uniformly low starting and running torque
Resistant to ageing and oxidation
Good corrosion protection
ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.
The lubricant is applied by brush, spatula, or grease gun. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
Upper service temperature
110 °C / 230 °F
Lower service temperature
-70 °C / -94 °F
Speed factor (n x dm)
1 000 000 mm/min
Worked penetration, acc. to Klein, 25 °C, upper limit value
320 0,1 mm
Worked penetration, acc. to Klein, 25 °C, lower limit value
280 0,1 mm
Kinematic viscosity of the base oil, 40 °C
approx. 7.5 mm²/s
Kinematic viscosity, 100 °C
approx. 2.6 mm²/s
Drop point, DIN ISO 2176
>= 180 °C
Colour space
yellow
Density at 20 °C
approx. 0.94 g/cm³
Buy Kluber ISOFLEX PDL 300A High-performance grease for bearings 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber ISOFLEX PDL 300A High-performance grease for bearings 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
