Product Overview

Good pressure resistance in bearings subject to high loads

Long component life due to good wear protection

Trouble-free operation due to good sealing and corrosion protection

Less maintenance due to long-term lubrication

Emergency lubricating properties for improved functionality in the case of starved lubrication

STABURAGS NBU 4 MF has proven successful for the lubrication of high-speed rolling bearings in rolls, spindles, cam

rollers and tensioning rollers. The grease is also used for bearings in compressors and deep drilling machines.

STABURAGS NBU 12 MF is used for highly loaded bearings, e.g. joints, spline shafts, couplings as well as pumps and

electric motors, for example in wood drying chambers.

Both greases are also suitable for steel-on-steel material combinations in slideways and plain bearings.

STABURAGS NBU 4 MF / 12 MF are applied by brush, spatula or grease gun. For application via central lubrication systems, pumpability should be checked with the manufacturer beforehand. The friction points can be cleaned with standard detergents.

Product data

Article number

17065

Chemical composition, solid lubricant

molybdenum disulphide

Chemical composition, thickener

barium complex soap

Chemical composition, type of oil

mineral oil

Lower service temperature

-15 °C / 5 °F

Upper service temperature

130 °C / 266 °F

Colour space

black

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

245 x 0,1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

275 x 0,1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx.  220 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx.  19 mm²/s

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water

0 corrosion degree

Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C

1 – 120 corrosion degree

Drop point, DIN ISO 2176, IP 396

>= 220 °C

Four-ball tester, welding load, DIN 51350 pt. 04

>= 4 500 N

Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating

<= 1 – 90

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.

60 months

Buy Kluber STABURAGS NBU 12 MF High performance grease 25kg bucket in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluber STABURAGS NBU 12 MF High performance grease 25kg bucket in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.