Product Overview

Long component life due to good corrosion protection in humid and aggressive environment

Good resistance to water, water vapour and many diluted alkaline and acidic solutions

Good sealing characteristics with water, hot water, water vapour and aggressive media

High wear protection in a wide range of mechano-dynamical loads and at high surface pressures

NSF H2 registered

STABURAGS NBU 30 has been especially designed for use as sealing grease, for valves and fittings as well as for the lubrication of low-speed rolling and plain bearings subject to humidity, water vapour and aggressive media. Typical applications include bearings in conveyors (load rollers in wet areas), in textile machines for wet processing (festoon steamers, washing machines), and bearings of machines in the food-processing industry.

STABURAGS NBU 30 is NSF H2 registered.

STABURAGS NBU 30 can be applied by spatula, brush or lever grease guns.

Friction points can be cleaned using commercial cleaning agents.

We recommend having the pumpability of STABURAGS NBU 30 in automatic lubrication systems checked by the manufacturer of the installation.

In general, plastics and elastomers which are resistant to mineral oil or mineral oil-based greases are compatible with STABURAGS NBU 30. Owing to the many different compositions of elastomers and plastics, we recommend checking their compatibility prior to series application.

Article number

017053

2 registration

135 679

Chemical composition, type of oil

mineral oil

Chemical composition, thickener

barium complex soap

Lower service temperature

-10 °C / 14 °F

Upper service temperature

150 °C / 302 °F

Color space

beige

Texture

fibrous

Texture

homogeneous

Density at 20 °C

approx. 0.99 g/cm³

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

245 x 0.1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

275 x 0.1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 490 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx. 31 mm²/s

Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value

10 000 mPas

Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value

20 000 mPas

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:

1 week, distilled water

<= 1 corrosion degree

Drop point, DIN ISO 2176, IP 396

>= 220 °C

Flow pressure of lubricating greases, DIN 51805, test temperature: -10 °C

<= 1 400 mbar

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened

original container, approx.

60 months

Buy  Kluber STABURAGS NBU 30 Lubricating grease with high resistance 1kg  in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluber STABURAGS NBU 30 Lubricating grease with high resistance 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.