Product Overview

Assembly grease protecting against tribo-corrosion

Good corrosion protection

Excellent resistance to water even under outdoor conditions

Approved by the company Knorr Bremse, N 12006-37

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies.

STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods.

STABURAGS NBU 30 PTM facili-ates assembly and disassembly of ABS sensors in vehicles.

Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals.

When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush.

STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.

Article number

17069

Chemical composition

solid lubricant

Chemical composition, thickener

barium complex soap

Chemical composition, type of oil

mineral oil

Lower service temperature

-10 °C / 14 °F

Upper service temperature

160 °C / 320 °F

Colour space

grey

Density at 20 °C

approx. 1,10 g/cm³

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

245 x 0,1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

275 x 0,1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 490 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx. 31 mm²/s

Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer

approx. 15 000 mPas

Drop point, DIN ISO 2176, IP 396

>= 220 °C

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.

60 months

Buy KRYTOX-GPL-206 (2-OZ-TUBE) in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of KRYTOX In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi ,Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluber STABURAGS NBU 30 PTM Lubricating grease 1.2kg can in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.