WOLFRACOAT C High-temperature lubricating paste | N° 099113 Wolfracoat C is a grey high-temperature lubricating paste containing metal solid lubricant pigments (e.g. copper, graphite). Wolfracoat C counteracts excessive friction, wear and seizing at lubricating points subject to high loads. Wolfracoat C forms a thermally stable lubricating film. At temperatures above 200 °C, the solid lubricants remain in the friction points and protect against tribocorrosion and fretting of e.g. fits up to 1200 °C. Temperature range: -30°C to +1200°C Volume: 60g tube Also available in: 400g cartridge, 1.2 kg can
Easier assembly and disassembly of power-locking connections
Reliable lubrication under mixed-friction and high-load conditions owing to ageing-resistant solid lubricants
Wolfracoat C is suitable for use as an assembly paste to lubricate power-locking connections and low-speed (plain) bearings subject to high temperatures.
Typical applications are in power plants, the steel industry, cement manufacture and similar industrial areas.
Apply the paste to clean surfaces or threads. It is important to obtain a uniform and coherent layer which is as thin as possible.
Any excess can removed with e.g. a leather cloth
Chemical composition, type of oil
synthetic hydrocarbon oil
Chemical composition, thickener
silicate
Chemical composition
solid lubricant
Lower service temperature
-30 °C / -22 °F
Upper service temperature
1200 °C / 2192 °F
Colour space
grey
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
270 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
310 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D- 445/ASTM D 7042, 40 °C
approx. 110 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value
5 000 mPas
Buy Kluber WOLFRACOAT C High-temperature lubricating paste 60g tube in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber WOLFRACOAT C High-temperature lubricating paste 60g tube in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
