Kluberplus S 06-100 Gel for facilitated assembly of elastomer and plastic components | N° 012102 When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force. Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. Volume: Can 1 kg Also available in: Canister 20 kg, Bucket 25 kg, Drum, 180 kg
Cost savings due to shorter assembly times and reduction of rejects due to lower assembly forces
Environmentally sound and safe to use
Lower consumption of chemicals due to excellent temporary lubricating effect
Non-flammable, water-based design – without solvent, mineral oil or silicones
Prevents workplace injuries due to less force required for assembly
Lower consumption of chemicals due to excellent temporary lubricating effect
Non-flammable, water-based design – without solvent, mineral oil or silicones
Prevents workplace injuries due to less force required for assembly
Neutral towards many materials, including EPDM, NBR, FKM, VMQ, ACM
The product concept has proven particularly successful in profiled seals, shaft seals, rubber sleeves and O-rings in the automotive industry.
Joining and assembly processes with rubber-elastic materials
O-rings
Membranes, bushings
Radial shaft seals (RSS) on shafts and in casings
Cover caps (e.g. for gear shafts)
Profiled seals, e.g. for doors, windows, crankshaft casings
Stopper and fixing elements
Sealing elements, moulded rubber parts
Hoses (e.g. brake fluid, cooling fluid and fuel hoses)
O-rings
Membranes, bushings
Radial shaft seals (RSS) on shafts and in casings
Cover caps (e.g. for gear shafts)
Profiled seals, e.g. for doors, windows, crankshaft casings
Stopper and fixing elements
Sealing elements, moulded rubber parts
Hoses (e.g. brake fluid, cooling fluid and fuel hoses)
The Kluberplus S 06 series shows good stability and no tendency to separation even after prolonged storage. Stirring is therefore not required prior to use.
The products’ viscosity can be reduced by dilution with water. Once diluted, the product should be used up completely without delay.
The Kluberplus S 06-100 series prevents during its application and upon complete evaporation of any water the immediate formation of rust / contact corrosion for a limited period of time.
Color space
white
Density at 20 °C
approx. 1.00 g/cm³
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 1 400 mm²/ s
pH-value, DIN ISO 976
approx. 8
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
24 months
Buy Kluberplus S 06-100 Assembly gel for elastomer components 1kg tin in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluberplus S 06-100 Assembly gel for elastomer components 1kg tin in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluberplus in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
