Product Overview

Long-term operation due to optimised wear protection and smooth running

Wide service temperature range allows a variety of applications

Cost savings due to long service life of grease

Particularly suitable for lifetime-lubricated capped or sealed deep groove ball bearings

Kluberquiet BQ 72-72 is suitable for bearings where long service life is required in combination with especially low-noise operation. Such applications include  rolling bearings in electric motors, fans, air conditioners, generators and belt tighteners in cars, electric household appliances and office equipment. The product should therefore primarily be used for the long-term or for-life lubrication of capped or sealed bearings.

The low-noise characteristics of this rolling bearing grease have been confirmed in various tests performed on special noise test rigs. Tests according to the  SKF-BeQuiet+ method showed that Kluberquiet BQ 72-72 can be classified as noise class GN 3.

Grease service life tests were conducted on SKF-ROF and FAG-FE9 rolling bearing testers according to DIN 51 821. The results showed long service lives at  high temperatures (see product data).

The lubricant is applied by means of a spatula, brush, grease gun or grease cartridge. We recommend completely removing preservatives before applying the grease. Preservatives for permanent use should be checked for purity and compatibility with Kluberquiet BQ 72-72. We can recommend compatible preservatives on request.

Article number

0940080591

Chemical composition, thickener

polyurea

Chemical composition, type of oil

ester oil

Lower service temperature

-45 °C / -49 °F

Upper service temperature

180 °C / 356 °F

Color space

beige

Texture

homogeneous

Texture

short-fibred

Density at 20 °C

approx. 0.96 g/cm³

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

250 x 0.1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

280 x 0.1 mm

Speed factor (n x dm)

1 000 000 mm/min

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 80 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx. 9.5 mm²/s

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:

1 week, distilled water

<= 1 corrosion degree

Drop point, DIN ISO 2176, IP 396

>= 250 °C

Flow pressure of lubricating greases, DIN 51805, test temperature:-45 °C

<= 1 400 mbar

Noise test run, SKF BeQuiet+, noise classes

>= GN3

Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000

min-1, axial load: 1500 N, temperature: 180 °C, service life F50:

>= 100 h

SKF-ROF rolling bearing tester, axial load: 100 N, radial load: 50 N, speed: 10000 min-1,

temperature:170 °C, service life F50:

>= 1 000 h

Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating

0 – 90

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened

original container, approx.

36 months

Buy Kluberquiet BQ 72-72 Low-noise rolling bearing grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluberquiet BQ 72-72 Low-noise rolling bearing grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluberquiet in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.