Product Overview

enables low starting and running torque

high pressure absorption capacity

good wear protection

excellent oxidation and ageing stability

good water and media resistance

PARALIQ 91 is used as release agent for baking tins and moulds in the food-processing industry. The lubricant can also be used as high-performance needle and sinker oil in textile machines as well as for deep-drawing or bending of packages for the pharmaceutical and foodprocessing industries

This special oil is tried-and-tested as release agent for moulds in blister machines used for the deep-drawing of film (bottom film)

The low base oil viscosity of Klubersynth BEM 34-32 ensures smooth running of linear guides, ball bushings, ball screws, rolling bearings, plain bearings as well as small gear systems in all sectors which are not subject to high vacuum, high temperatures or aggressive media. Due to the excellent metal adhesion properties, Klubersynth BEM 34-32 achieves

considerably lower wear rates than many PFPE-based greases used under similar application conditions. The product is compatible with most plastic seals and cage materials

Article number

4127

Chemical composition, thickener

special calcium soap

Chemical composition, type of oil

synthetic hydrocarbon oil

Lower service temperature

-40 °C / -40 °F

Upper service temperature

130 °C / 266 °F

Colour space

beige

Texture

short-fibred

Texture

homogeneous

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

265 x 0,1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

295 x 0,1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 31 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx. 5,9 mm²/s

NLGI grade, DIN 51818

2

Speed factor (n x dm)

approx. 1 000 000 mm/min

Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value

2 800 mPas

Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value

5 200 mPas

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water

<= 1 corrosion degree

Drop point, DIN ISO 2176, IP 396

>= 220 °C

Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating

1 – 90

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.

36 months

Buy Klubersynth BEM 34-32 Synthetic smooth-running grease 60g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Klubersynth BEM 34-32 Synthetic smooth-running grease 60g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Klubersynth in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.