Product Overview

Long availability of components over a wide service temperature range

when exposed to corrosive atmosphere

when exposed to high vibrations and loads

High economic efficiency due to innovative hybrid grease formulation

Klubersynth BHP 72-102 has been designed for the lifetime lubrication of rolling bearings subject to high loads and alternating temperatures ranging from -40 °C to 200 °C. The product is suitable for the lubrication highly loaded rolling bearings in components close to automobile engines, e.g. bearings viscocouplings, belt tensioners, water pumps, fans, servomotors and similar applications. Klubersynth BHP 72-102 forms a stable grease collar that serves as a lubricant reservoir resistant to vibration and at the same time helps to protect the bearings against contaminants.

Klubersynth BHP 72-102 can be applied by standard metering systems (brush, spatula, grease gun). Ideally, the bearing should be metallically blank. If any anticorrosive fluid has been applied prior to greasing, we recommend checking compatibility

Chemical composition, type of oil

PFPE

Chemical composition, type of oil

ester oil

Chemical composition, thickener

polyurea

Chemical composition, solid lubricant

PTFE

Lower service temperature

-40 °C / -40 °F

Upper service temperature

200 °C / 392 °F

Colour space

white

Density at 20 °C

approx. 1.30g/cm³

Drop point, DIN ISO 2176, IP 396

>= 240 °C

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

240 x 0.1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

270 x 0.1 mm

Base oil viscosity at 40 °C, calculated value

approx. 130mm²/s

Base oil viscosity at 100 °C, calculated value

approx. 20 mm²/s

Speed factor (n x dm)

approx. 1 000 000   mm/min

Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value

4 000 mPas

Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value

8 000 mPas

Corrosion inhibiting properties of lubricating greases, based on DIN 51802, SKF-EMCOR, test   duration: 1 week, 3 % NaCl solution

<= 3 corrosion degree

Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C

1 – 100 corrosion   degree

Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C

<= 1 400 mbar

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened

original container, approx.

36 months

Buy Klubersynth BHP 72-102 High temperature grease 500g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Klubersynth BHP 72-102 High temperature grease 500g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Klubersynth in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.