Klubersynth BMQ 72-162 For lifetime lubrication at low and high temperatures | N° 094073 Klubersynth BMQ 72-162 is a synthetic long-term lubricating grease. It is based on ester oils and perfluorinated polyether oil. Its outstanding characteristics are good oil retention at high permanent temperatures and good corrosion protection as well as water resistance. Temperature range: -40°C to +200°C Volume: 500g cartridge Also available in: 600g can, 30 kg bucket
Low component noise at high temperatures
due to innovative hybrid grease formulation
due to the addition of fluorinated base oils
due to innovative hybrid grease formulation
due to the addition of fluorinated base oils
High component performance
due to a wide service temperature range
due to good corrosion and wear protection properties
due to a wide service temperature range
due to good corrosion and wear protection properties
Klubersynth BMQ 72-162 is preferably used for plain and rolling bearings at high and low temperatures requiring good thermal stability but where the use of silicone is forbidden. It has proven successful for the lifetime lubrication of rolling bearings in electric motors, smoke extractor motors and clutch release bearings.
It is not necessary to remove the anticorrosive film in rolling bearings prior to applying Klubersynth BMQ 72-162. The lubricant can be removed using organic solvents.
To attain a maximum service life and minimum noise level we recommend thorough cleaning of the friction point and seeking detailed service advice from our application engineers.
Chemical composition, thickener
polyurea
Chemical composition, type of oil
PFPE
Chemical composition, type of oil
ester oil
Lower service temperature
-40 °C / -40 °F
Upper service temperature
200 °C / 392 °F
Colour space
beige
Density at 20 °C
approx. 1.30 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
240 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
270 x 0.1 mm
Base oil viscosity at 40 °C, calculated value
approx. 160 mm²/s
Base oil viscosity at 100 °C, calculated value
approx. 27 mm²/s
Drop point, DIN ISO 2176, IP 396
>= 250 °C
Buy Klubersynth BMQ 72-162 Long-term lubricating grease 500g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Klubersynth BMQ 72-162 Long-term lubricating grease 500g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Klubersynth in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
