Klubertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177 Klubertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener. The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klubertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials. Content: 10kg bucket
Long component life
Over a wide service temperature range
In contact with aggressive media
WWwhere sensitive plastic materials are used
Over a wide service temperature range
In contact with aggressive media
WWwhere sensitive plastic materials are used
Klubertemp GR M greases are preferably used for the lubrication of electromechanical actuators, small gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stickslip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.
For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Kluberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues.
For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klubertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser.
Chemical composition, type of oil
PFPE
Lower service temperature
-60 °C / -76 °F
Upper service temperature
200 °C / 392 °F
Colour space
white
Density at 20 °C
approx. 1.94 g/cm³ a
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042, 40 °C
approx. 160 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM
D-445/ASTM D 7042, 100 °C
approx. 45 mm²/s
Evaporation loss, ASTM D 2595 22h/204°C
<= 2 % by weight
Texture
homogeneous
Buy Klubertemp GR M30 High viscosity long-term grease white 10kg hobbock in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Klubertemp GR M30 High viscosity long-term grease white 10kg hobbock in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Klubertemp in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.