Klubertemp HM 83-401 High-temperature long-term greases | N° 090090 Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads. Content: 800g cartridge Available in 1kg can, 10kg bucket
Increased plant availability and reduced maintenance effort
At very high operating temperatures up to 260 ° C
Under the influence of aggressive chemicals and vapors
Good compatibility with most plastics and elastomers
Klubertemp HM greases are widely used in industries where the regular maintenance of lubrication points with standard temperatures of up to 260 ° C is indispensable. Klubertemp HM greases support the problem-free machine function in numerous industries and components, thanks to availability in three consistency classes. This allows an individual selection to meet the different requirements of a large number of applications optimally.
Typical applications can be found in conveyors, corrugated cardboard systems, plastic technology, textile industry, printing industry and the like
Klubertemp HM greases are listed in maintenance and lubrication plans by leading manufacturers.
Chemical composition, type of oil
PFPE
Chemical composition, solid lubricant
PTFE
Lower service temperature
-40 °C / -40 °F
Upper service temperature
260 °C / 500 °F
Colour space
white
Density at 20 °C
approx. 1,95 g/cm³
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 420 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 40 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value
4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value
8 000 mPas
NLGI grade, DIN 51818
1
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water
<= 1 corrosion degree
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -40 °C
<= 1 400 mbar
Four-ball tester, welding load, DIN 51350 pt. 04
>= 7 000 N
Minimum shelf life from the date of manufacture – in a dry, frost free
place and in the unopened original container, approx.
60 months
Buy Klubertemp HM 83-401 High-temperature long-term lubrication grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Klubertemp HM 83-401 High-temperature long-term lubrication grease 1kg in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Klubertemp in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
