Permatex Form-A-Gasket No. 2 Sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals. FEATURES Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications Designed for dressing and sealing cut gaskets on flexible and stamped parts Allows for easy disassembly if required Resists gasoline, oil and grease Temperature Range: -65°F to 400°F (-54°C to 204°C)
Permatex 80011 Form-A Gasket No.2 Sealant is a slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications. It is resistant to gasoline, oil and grease. For a fast-drying check out Permatex’s Form-A-Gasket No. 1 Sealant.
PRODUCT BENEFITS
TYPICAL APPLICATIONS
DIRECTIONS: Use on flanges, on both sides of old or new gaskets, threaded and hose connections, cover plates and all semipermanent reassembly work. Clean surfaces thoroughly. Apply a thin, even film. Allow to air dry a few minutes until film becomes “tacky” Then assemble and tighten into position.
Buy Permatex 80011 Form-A-Gasket No.2 Sealant in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE , SAUDI ARABIA , KUWAIT , QATAR , BAHRAIN , OMAN ,IRAQ at best Prices from HNA Enterprises. Ready Stock Available. Check out our range of Permatex in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi ,Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Buy Permatex 80011 Form-A-Gasket No.2 Sealant in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Permatex in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
