Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 487 products across 23 categories
Fluid gear grease MICROLUBE GB 00 is a special mineral oil based grease free from solid lubricants. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, shows good wetting behaviour, water resistance and backflow behaviour. Content: 1kg can Available in 1kg can, 25kg bucket,
Kluber Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klubersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection, and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.
Kluber Klubersynth BHP 72-102 High-temperature grease is an innovative, synthetic long-term lubricating grease based on ester oils and perfluorinated polyether oil (PFPE). Its outstanding characteristics are good oil retention at high permanent temperatures and good corrosion protection as well as water resistance – yet another contribution to a longer bearing life and a higher thermal stability compared to conventional lubricants. In tests performed on component test rigs subject to high permanent temperatures up to 200 °C Klubersynth BHP 72-102 offers an extremely long service life.
Kluber Klubersynth AR 34-401 and -402 are synthetic wide-range greases based on a special calcium soap thickener. They are free from raw materials containing heavy metals and solid lubricants. The special additives contained in these greases provide the utmost performance along with operational reliability and long service life.
Kluber Kluberplex SK 12 Special Lubricating Grease for plain bearings. Service temperature range: -40°C to +140°C Kluberplex SK 12 is a semi-synthetic long-term grease high-pressure absorption capacity at low speeds good adhesion on the component and resistance to aggressive media enhance wear protection Composition: barium complex soap, synthetic hydrocarbon oil, mineral oil Colour: Beige Size: 1kg can, also available as 25kg bucket
Kluberpaste HEL 46-450 High-temperature screw paste | N° 089032 Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants. Kluberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant. Temperature range: -40°C to +1000°C Volume: 70g tube Also available in: 750g can, 600g cartridge, 30kg bucket
Kluberpaste HEL 46-450 High-temperature screw paste | N° 089032 Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants. Kluberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant. Temperature range: -40°C to +1000°C Volume: 600g cartridge Also available in: 70g tube, 750g can, 30kg bucket
Kluber Kluberalfa GR Y VAC 2 Special Greases are white, homogeneous long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener. Besides their good resistance to high temperature and aggressive media, Kluberalfa GR Y VAC 2 greases show low evaporation under vacuum conditions. Kluberalfa GR Y VAC greases are made in three different NLGI classes, allowing component-specific selection for lifetime lubrication.
Synthetic long-term grease ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations. The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection. Content: 370g cartridge Available in 40g tube, 370g cartridge, 1kg can, 25kg bucket
Synthetic long-term grease ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations. The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection. Content: 25kg bucket Available in 40g tube, 400g cartridge, 1kg can, 25kg bucket
Synthetic long-term grease Kluber ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations. The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA52 increase wear protection. Content: 1kg can Available in 40g tube, 400g cartridge, 1kg can, 25kg bucket
ISOFLEX TOPAS NCA 51 Synthetic low-temperature grease | N° 004205 ISOFLEX TOPAS NCA 51 is a special synthetic low-temperature and long-term grease. It consists of a synthetic hydrocarbon oil and a special calcium soap. Temperature range: -40°C to +150°C Volume: 1kg can
Explore our product categories to find exactly what you need for your industrial applications.
