A durable, single component metal repair composite based on a silicon alloy blended with a heat-activated epoxy resin. Designed to repair and protect metal surfaces suffering from Corrosion under Insulation (CUI), Belzona 1251 (HA-Metal) can be easily applied by spatula, applicator or brush. This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation avoiding production downtime. Once cured, this solvent-free repair composite provides outstanding corrosion protection. Belzona 1251 (HA-Metal) is ideally suited to be over coated with Belzona 5851 (HA-Barrier) to ensure long-lasting performance
In-situ application to live equipment operating at high temperature with minimal surface preparation
Multi-purpose durable metal repair composite
Single pack system, no weighing or mixing required
Reduced health and safety risks as it is solvent-free
Fast cure allowing equipment to be re-insulated with minimum delay
Excellent corrosion protection
Impact and abrasion resistance
Good chemical resistance against a wide range of chemicals
Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
Does not corrode
Repair and prevention of Corrosion under Insulation (CUI)
Resurface of pitted metal surfaces
Repair of thin-wall defects
Bonding of doubler plates
Leak sealing of pipework
Buy Belzona 1251 (HA-Metal) in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Belzona in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
