Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 1432 products across 23 categories
A durable, single component metal repair composite based on a silicon alloy blended with a heat-activated epoxy resin. Designed to repair and protect metal surfaces suffering from Corrosion under Insulation (CUI), Belzona 1251 (HA-Metal) can be easily applied by spatula, applicator or brush. This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation avoiding production downtime. Once cured, this solvent-free repair composite provides outstanding corrosion protection. Belzona 1251 (HA-Metal) is ideally suited to be over coated with Belzona 5851 (HA-Barrier) to ensure long-lasting performance
A 2-part composite material for metal repair based on a silicone steel reinforced polymer system. Due to its fast-curing characteristics, this repair material is ideal for emergency repair situations. It can be machined using conventional tools and provides a permanent metal bonding or rebuilding solution.
A 2-part surface-tolerant epoxy composite engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. This multi-purpose solvent-free material exhibits rapid cure and excellent adhesion to manually prepared substrates, where grit blasting cannot be achieved. Belzona 1212 is easy to mix and apply without the need for specialist tools and is ideal for repair kits and emergency situations, ensuring fast back in service time.
A 2-part composite material for metal repair and resurfacing based on a solvent-free, surface-tolerant epoxy resin reinforced with silicon steel alloy. This composite material is specifically designed for application to wet and oil contaminated surfaces, as well as for underwater applications. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
A 2-part epoxy-based repair composite for rebuilding shallow pitting in metals damaged by erosion and corrosion. This solvent-free material is specifically formulated to easily fill in areas of metal loss up to 6 mm deep, quickly restoring large areas and avoiding hot work and plate welding. Belzona 1151 (Smoothing Metal) will not corrode and will resist a wide range of chemicals.
A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss. This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.
A 2-part repair composite for metal repair and resurfacing based on solvent-free epoxy resin reinforced with silicon steel alloy. This repair material has been developed to offer an extended working life, ideal for large applications where greater volumes of material are required or to provide adequate working time at higher temperatures. Belzona 1121 (Super XL-Metal) will not corrode and resists a wide range of chemicals. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
Belzona 1111 (Super Metal) is a cold-curing 100% solids epoxy composite reinforced with silicon steel alloy. This material can be used for various applications including bonding, shimming, forming, rebuilding, wrapping, patching, sealing and filling. It will not shrink while curing in service, allowing for exact dimensions and geometry to be achieved. Belzona 1111 ensures lasting in-service performance, accounting for temperature and pressure fluctuations, loading and stresses, impact and abrasion. Five-year shelf life makes Belzona 1111 an invaluable stock item for many maintenance professionals.
Araldite Standard is a super strong gap filling epoxy adhesive for household, workshop, industry, repairs. Water proof and chemical resistant. Bonds most materials to themselves or to one another specially to metal, wood, glass, ceramics, rigid plastics and concrete. Cures fast at room temperature 18 – 24 Degree C. Enables rapid but durable assembly and repair work. cures slowly at temperature down to 5 degree c. Apply on clean and dry surface.
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Explore our product categories to find exactly what you need for your industrial applications.
