ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 are rolling and plain bearing greases based on a synthetic hydrocarbon oil and a barium complex soap. The special barium-soap thickener used in the ISOFLEX TOPAS NB 52 and 152 greases offers good load-carrying capacity as well as resistance to water and ambient media unlike other soap-based thickeners. Both products show good protection against corrosion as well as oxidation and ageing stability. The Kluber barium complex soap is ELINCS-registered and approved by GASG (Global Automotive Stakeholders Group). ISOFLEX TOPAS NB52 is suitable for temperatures between -50 °C to 120 °C and short peak temperatures up to 150 °C depending on the application, e.g. enclosed gears, car seat adjustment mechanisms.
Special lubricating grease with EP additives, compatible with EPDM. SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 400g Packaging type: cartridge Also available in: 1Kg can, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 1kg Packaging type: can Also available in: 400g cartridge, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 180 KG Packaging type: Barrel Also available in: 1Kg can, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Volume : 25kg Packaging type: Bucket Also available in: 400g cartridge, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 1kg can Available in 400g cartridge, 1kg can, 25kg bucket
