Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Good corrosion protection
Good resistance to ambient media
Good wear protection / EP properties
Protects against tribo-corrosion
High-pressure grease
STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.
It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.
The product is applied by brush, spatula or conventional metering systems.
Article number
017105
NLGI grade, DIN 51818
2
NSF-H2 registration
135 684
Chemical composition, type of oil
mineral oil
Chemical composition, thickener
barium complex soap
Lower service temperature
-20 °C / -4 °F
Upper service temperature
140 °C / 284 °F
Color space
brown
Density at 20 °C
approx. 0.99 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 97 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 11.5 mm²/s
Speed factor (n x dm)
approx. 500 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value
5 500 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value
9 500 mPas
Drop point, DIN ISO 2176
>= 220 °C
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
60 months
Buy Kluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
