Adhesives and lubricants aid in bonding and friction reduction. They are vital in mechanical assemblies, maintenance, and industrial operations.
Showing 9 of 487 products
Kluberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants. Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads
Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam. PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GB 363 can contribute to increase reliability of your production processes. Wenevertheless recommend conducting an additional risk analysis, e.g. HACCP. Content: 1kg can Available in 40g tube, 370g cartridge, 1kg can, 25kg bucket
Special lubricating greases for boundary friction conditions and tribo-corrosion MICROLUBE GL 261 grease is a special lubricating grease on a mineral oil base. It also contains special lithium soap and the MICROLUBE additive package, which ensures a wear-free surface finish. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. MICROLUBE GL 261 grease has the capacity to absorb high pressures, and it has good anti-corrosion properties. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket, 180kg barrel
Fluid gear grease MICROLUBE GB 00 is a special mineral oil based grease free from solid lubricants. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, shows good wetting behaviour, water resistance and backflow behaviour. Content: 1kg can Available in 1kg can, 25kg bucket,
Kluber Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klubersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection, and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.
Kluber Klubersynth BHP 72-102 High-temperature grease is an innovative, synthetic long-term lubricating grease based on ester oils and perfluorinated polyether oil (PFPE). Its outstanding characteristics are good oil retention at high permanent temperatures and good corrosion protection as well as water resistance – yet another contribution to a longer bearing life and a higher thermal stability compared to conventional lubricants. In tests performed on component test rigs subject to high permanent temperatures up to 200 °C Klubersynth BHP 72-102 offers an extremely long service life.
Kluber Klubersynth AR 34-401 and -402 are synthetic wide-range greases based on a special calcium soap thickener. They are free from raw materials containing heavy metals and solid lubricants. The special additives contained in these greases provide the utmost performance along with operational reliability and long service life.
Kluber Kluberplex SK 12 Special Lubricating Grease for plain bearings. Service temperature range: -40°C to +140°C Kluberplex SK 12 is a semi-synthetic long-term grease high-pressure absorption capacity at low speeds good adhesion on the component and resistance to aggressive media enhance wear protection Composition: barium complex soap, synthetic hydrocarbon oil, mineral oil Colour: Beige Size: 1kg can, also available as 25kg bucket
Kluberpaste HEL 46-450 High-temperature screw paste | N° 089032 Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants. Kluberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant. Temperature range: -40°C to +1000°C Volume: 70g tube Also available in: 750g can, 600g cartridge, 30kg bucket
