Adhesives and lubricants aid in bonding and friction reduction. They are vital in mechanical assemblies, maintenance, and industrial operations.
Showing 9 of 487 products
A solvent-free, single-component epoxy coating, which cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Belzona 5851 (HA-Barrier) can be easily applied by brush and does not require any weighing or mixing. This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation, avoiding production downtime. Once cured, it provides outstanding corrosion protection. Also available is Belzona 1251 (HA-Barrier), a heat-activated epoxy repair composite which can be used in fill pitting and bond equipment among other applications.
A solvent-free, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F – 176°F) with minimal preparation required.
Belzona 5831LT is an environmental moisture-tolerant barrier coating, specially formulated for the protection of metallic and non-metallic surfaces at lower temperatures. Similar to Belzona 5831 (ST Barrier), this coating uses moisture-tolerant technology. The product displaces surface contaminants, ensuring maximum adhesion to damp, wet or oily surfaces and underwater. This solvent-free material can be applied on to virtually any surface and is easy to apply at low ambient temperatures and on cold substrates. Belzona 5831LT will provide long-term protection against corrosion, erosion and environmental attack.
A 2-part epoxy coating which once cured forms a barrier coating for the protection of equipment operating under immersed conditions or in contact with aqueous solutions. This solvent-free epoxy coating bonds strongly to steel and other metallic and non-metallic surfaces such as concrete or brick. Belzona 5831 (ST-Barrier) is specifically formulated for application to wet and oil contaminated surfaces that cannot be dry for application, as well as for underwater applications. The coating displaces water from the surface ensuring maximum adhesion to damp or wet surfaces, even underwater.
A 2-part, epoxy-based, ceramic filled, solvent-free coating applied by brush or spray for the protection of metallic and non-metallic surfaces operating under immersion conditions in contact with aqueous solutions. Belzona 5821 provides an outstanding protection from the effects of salt, water, acids, alkalis, alcohols and hydrocarbons. The coating can be applied to virtually any rigid surface including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium.
Belzona 5813 is a solvent-free, two-component static dissipative barrier coating. This epoxy based coating system is designed to transfer surface electrostatic charge build-up away from hazardous areas. Due to its excellent static dissipative properties, Belzona 5813 helps to eliminate electrostatic charge where flammable materials are stored. Surfaces coated with Belzona 5813 prevent sparks, shorts, sudden discharge that can lead to an explosion. Belzona 5813 is easy to mix and can be applied without the need of specialists tools.
A 2-part epoxy-based system applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion conditions in contact with water and aqueous solutions when potable water approval is required. Use Belzona 5812DW in combination with Belzona 9241 aggregate to create a drinking water approved concrete rebuilding system for heavily damaged vertical and horizontal surfaces.
A 2-part epoxy coating which provides outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 50°C (122°F) from the effects of corrosion. This solvent-free material can be easily applied by brush or spray to virtually any metallic and non-metallic surface, simplifying maintenance works. Belzona 5811DW2 (DW Immersion Grade) is a variant of Belzona 5811 (Immersion Grade) approved by WRAS for contact with potable water.
Belzona 5721 is a 2-component, high-performance coating, specifically formulated for protecting the leading edge of wind turbine blades from erosion and impact damage. This system is ideally suited for the rigorours of in-situ applications, being easy to apply by brush in a single coat. Together with its low-temperature cure technology, Belzona 5721 can maximise available maintenance opportunities and ensure the turbine’s fast return to service. It is also safe to use due to being cold applied without the need for specialist tools or equipment. Furthermore, the Belzona solution is 100% solids and solvent free, making it suitable for factory application.
