Adhesives and lubricants aid in bonding and friction reduction. They are vital in mechanical assemblies, maintenance, and industrial operations.
Showing 9 of 487 products
A 2-part spray- or brush-applied high temperature epoxy coating for erosion and corrosion protection of equipment operating under continuous immersion up to 95°C (203°F). This solvent-free coating can be easily mixed and applied at ambient temperatures as a one or two coat system. Its 24 hours overcoating window allows large applications to be quickly completed, reducing downtime. Due to its capability for high film build in a single coat without sagging and superior erosion resistance, Belzona 1381 is ideally suited to be used as an epoxy pipe lining for protection of girth welds on internal field joints. This new generation spray-applied filler-free coating provides the robust protection of a ceramic coating without causing wear or damage to spray equipment.
A 2-part epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while protecting them from the effects of erosion and corrosion. This high performance product is proven to reduce energy consumption, provide excellent chemical resistance and lower maintenance costs. Belzona 1341 (Supermetalglide) improves pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment.
A 2-part epoxy-based repair composite designed for metal repair and protection against the effects of erosion and corrosion. This solvent-free repair composite has excellent chemical resistance and will bond to all metals and most other rigid surfaces. It is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work. It is ideally suited to be overcoated with Belzona 1321 (Ceramic S-Metal) to ensure long-lasting performance. Belzona 1311 (Ceramic R-Metal) can also be used as a high strength structural adhesive for metal bonding and to create irregular load bearing shims.
A durable, single component metal repair composite based on a silicon alloy blended with a heat-activated epoxy resin. Designed to repair and protect metal surfaces suffering from Corrosion under Insulation (CUI), Belzona 1251 (HA-Metal) can be easily applied by spatula, applicator or brush. This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation avoiding production downtime. Once cured, this solvent-free repair composite provides outstanding corrosion protection. Belzona 1251 (HA-Metal) is ideally suited to be over coated with Belzona 5851 (HA-Barrier) to ensure long-lasting performance
A 2-part composite material for metal repair based on a silicone steel reinforced polymer system. Due to its fast-curing characteristics, this repair material is ideal for emergency repair situations. It can be machined using conventional tools and provides a permanent metal bonding or rebuilding solution.
A 2-part surface-tolerant epoxy composite engineered specifically for in-situ application to wet, oil contaminated and underwater surfaces. This multi-purpose solvent-free material exhibits rapid cure and excellent adhesion to manually prepared substrates, where grit blasting cannot be achieved. Belzona 1212 is easy to mix and apply without the need for specialist tools and is ideal for repair kits and emergency situations, ensuring fast back in service time.
A 2-part composite material for metal repair and resurfacing based on a solvent-free, surface-tolerant epoxy resin reinforced with silicon steel alloy. This composite material is specifically designed for application to wet and oil contaminated surfaces, as well as for underwater applications. It is easy to mix and apply without the need of specialist tools and can be machined using conventional tools.
A 2-part epoxy-based repair composite for rebuilding shallow pitting in metals damaged by erosion and corrosion. This solvent-free material is specifically formulated to easily fill in areas of metal loss up to 6 mm deep, quickly restoring large areas and avoiding hot work and plate welding. Belzona 1151 (Smoothing Metal) will not corrode and will resist a wide range of chemicals.
A 2-part epoxy metal repair composite with self-lubricating properties for creation of low friction surfaces and protection of lubrication systems from wear and seizure in the event of lubrication loss. This solvent-free repair composite has a unique microporous structure which allows it to trap and hold lubricating oil, minimising friction at start-up and improving the efficiency of mechanical equipment such as pumps. It has outstanding chemical resistance and will bond to almost any rigid surface without the need for hot work.
