Explore our complete range of industrial products and equipment, from safety gear to mechanical components and tools.
Showing 9 of 1432 products
Special lubricating grease with EP additives, compatible with EPDM. SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 400g Packaging type: cartridge Also available in: 1Kg can, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 1kg Packaging type: can Also available in: 400g cartridge, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Size: 180 KG Packaging type: Barrel Also available in: 1Kg can, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Stabutherm GH 462 High-temperature lubricating grease NLGI 2 | N° 020511 STABUTHERM GH 462 is a hightemperature lubricating grease based on mineral oil and polyurea. It has a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 462 features highly effective anti-wear properties. The grease is very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 462 is resistant to oxidation and provides reliable protection against corrosion. Volume : 25kg Packaging type: Bucket Also available in: 400g cartridge, 5kg bucket, 25kg bucket, 50kg bucket, 180kg barrel
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 1kg can Available in 400g cartridge, 1kg can, 25kg bucket
Lubricating greases with excellent wear resistance STABURAGS NBU 4, 12 are lubricating greases based on mineral oil and barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water and many diluted alkaline and acid solutions Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
