BIRKOSIT Dichtungskitt are sealing compounds used to join metallic elements in industry are subject to extreme demands due to the high temperatures and/or high pressure.
BIRKOSIT Dichtungskitt® can be relied upon to meet the relevant requirements.
BIRKOSIT Dichtungskitt® is a single-component sealant with the consistency of paste which is reddish-brown in colour and retains permanent elasticity.
It is primarily used in steam turbines, gas turbines, compressors, generators, expanders, pumps, valves, gear units and marine engines.
A 100% seal at pressures of up to 250 bar is guaranteed on sealing surfaces and joints. A pressure resistance of up to 450 bar is guaranteed for flanges without sealing rings and up to 550 bar for threaded connections. The pressure resistance implies process-related vibrations. It is suitable for use on sealing surfaces of all sizes. Any machined or prepared surfaces with damage to sealing surfaces of ≤ 0.2 mm can be treated with BIRKOSIT Dichtungskitt®.
Where products are required to fill isolated cavities of ≥ 0.2 mm to 1.0 mm we can recommend FILLING basic®, FILLING 1000® and FILLING 2000® for use.
The tin should be brought to room temperature before use to make the product easier to apply and spread. Alternatively, a tenth part of boiled linseed oil from our range can be added.
A layer of BIRKOSIT is applied with a brush or spatula on both sides of the dry sealing surfaces to a thickness of 0.2 mm to 0.3 mm. The joint can be subjected to load immediately. It is sufficiently flexible to allow subsequent alignment work to be carried out on the connection. It has an unlimited assembly time.
Buy BIRKOSIT Dichtungskitt in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi , UAE ,Saudi Arabia, Qatar, Oman, Bahrain from HNA Enterprises at best prices!
Buy BIRKOSIT Dichtungskitt in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of BIRKOSIT Dichtungskitt in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
