Product Overview

Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product

Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion

High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks

Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product

Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion

High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks

ALTEMP Q NB 50 can be used for the assembly of frictional connections, e.g. annular springs or split taper sleeves, and positive connections, e.g. bearing seats, profiled guides, etc.

The product has proven particularly successful in the lubrication of clamping chucks. High precision and constant clamping forces are essential requirements in chucks. Any decrease of the clamping force may cause tools or workpieces to become loose.

ALTEMP Q NB 50 improves the sliding behavior of moving chuck components, enables constant clamping forces and may therefore be used in all types of chucks, such as scroll, cam and spiral chucks. It prevents stick-slip and protects against triboand fretting corrosion in frictional or positive connections. Furthermore, ALTEMP Q NB 50 is resistant to water and media, e.g. against cooling lubricants.

Clean and degrease the surfaces thoroughly. Then apply the paste in a thin, coherent layer by means of a brush or cloth that does not fray (do not rub in). ALTEMP Q NB 50-Spray can be used to facilitate application.

Article number

005011

Lower service temperature

-15 °C / 5 °F

Upper service temperature

150 °C / 302 °F

Chemical composition

solid lubricant

Chemical composition, thickener

barium complex soap

Chemical composition, type of oil

mineral oil

Texture

almost homogeneous

Texture

fibrous

Color space

white

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

250 x 0.1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

270 x 0.1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 46 mm²/s

Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C

1 – 100 corrosion degree

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration:

1 week, distilled water

<= 1 corrosion degree

Four-ball tester, welding load, DIN 51350 pt. 04

>= 4 000 N

Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value

7 000 mPas

Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value

13 000 mPas

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened

original container, approx.

24 months

Buy  Kluber ALTEMP Q NB 50 Lubricating and assembly paste 600g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluber ALTEMP Q NB 50 Lubricating and assembly paste 600g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.