ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060 Operators of precision-engineering and textile industry applications often have different requirements than in other industries. Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement. Temperature range: -45°C to +60°C Volume: 1 kg can Also available in: 25 kg bucket
Synthetic product for low friction and starting torque
Longer component lifetime with optimised wear protection
Good corrosion protection preventing premature component failure
Low internal friction of the lubricant for low internally generated heat in the bearing and increased service life
The special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry.
Typical applications of ISOFLEX TEL 3000 ALTEMP include:
Rolling and plain bearings used in precision engineering at normal and low temperatures
Zig-zag winding guides in spool and twisting machines
Yarn guide rails in spool and twisting machines
Rolling and plain bearings used in precision engineering at normal and low temperatures
Zig-zag winding guides in spool and twisting machines
Yarn guide rails in spool and twisting machines
ISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary.
Lower service temperature
-45 °C / -49 °F
Upper service temperature
60 °C / 140 °F
Texture
homogeneous
Texture
short-fibred
Colour space
beige
Density at 20 °C
approx. 0.95 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
280 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
310 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 19 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 4.5 mm²/s
Buy Kluber ISOFLEX TEL/3000 ALTEMP Sliding grease 1kg can in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber ISOFLEX TEL/3000 ALTEMP Sliding grease 1kg can in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.