Long-term and high-temperature grease for rolling bearings PETAMO GHY 133 N is a high-performance lubricating grease for rolling bearings subject to high temperatures. It has the following advantages: – Resistance to high temperatures – High resistance to oxidation – Efficient wear protection even at high temperatures – Good corrosion protection – Good water resistance The high performance level of PETAMO GHY 133 N is achieved by means of selected product constituents such as polyurea thickener, mineral oil, synthetic hydrocarbon oil and additives, as well as the production technology. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Reduced maintenance due to lifetime lubrication
Wide service temperature range allows a variety of applications
Reliable operation and long service life due to excellent protection against wear and corrosion, especially in water pump bearings and clutch release bearings
PETAMO GHY 133 N is suitable for long-term and lifetime lubrication in a variety of applications including:
– Rolling bearings in
– electric motors
– fan heaters
– drying installations
– textile machines
– paper machines
– Automotive components, e.g.
– belt tensioning rollers (rotating outer ring)
– couplings
– water pumps
– fans
– wheel bearings
In component tests PETAMO GHY 133 N achieves excellent results in terms of service life.
In water pump bearings PETAMO GHY 133 N offers excellent compatibility with coolants containing glycol.
PETAMO GHY 133 N can be applied by means of appropriate automatic or conventional lubrication systems in a clean working environment.
Article number
094061
Lubricating greases -K, DIN 51825 in connection with DIN 51502
KHC2P-30
Chemical composition, type of oil
synthetic hydrocarbon oil
Chemical composition, type of oil
mineral oil
Chemical composition, thickener
polyurea
Lower service temperature
-40 °C / -40 °F
Upper service temperature
160 °C / 320 °F
Color space
brown
Density at 20 °C
approx. 0.90 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 165 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 18 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:
1 week, distilled water
<= 1 corrosion degree
Drop point, DIN ISO 2176, IP 396
>= 250 °C
Flow pressure of lubricating greases, DIN 51805, test temperature: -30 °C
<= 1 400 mbar
Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed:6000
min-1, axial load:1500 N, temperature: 160 °C, service life F50:
>= 100 h
Low-temperature torque, IP 186, -40 °C, running
<= 250 mNm
Low-temperature torque, IP 186, -40 °C, start
<= 1 000 mNm
Speed factor (n x dm)
approx. 500 000 mm/min
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened
original container, approx.
24 months
Buy Kluber PETAMO GHY 133 N Long-term and high-temperature grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber PETAMO GHY 133 N Long-term and high-temperature grease 400g in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
