Lubricating greases with excellent wear resistance STABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutions Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
Good corrosion protection
Good resistance to ambient media
Excellent wear protection
Good resistance to tribo-corrosion
Good load-carrying capacity
Good sealing effect
STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers and
motors.
STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.
Article number
17052
NSF-H2 registration
135 689
Chemical composition, type of oil
mineral oil
Chemical composition, thickener
barium complex soap
Lower service temperature
-15 °C / 5 °F
Upper service temperature
130 °C / 266 °F
Colour space
brown
Density at 20 °C
approx. 0,99 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
245 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
275 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 220 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 19 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value
9 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value
15 000 mPas
Drop point, DIN ISO 2176, IP 396
>= 220 °C
Four-ball tester, welding load, DIN 51350 pt. 04
>= 3 000 N
Speed factor (n x dm)
approx. 350 000 mm/min
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating
<= 1 – 90
Flow pressure of lubricating greases, DIN 51805, test temperature: -15 °C
<= 1 600 mbar
Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.
60 months
Buy Kluber STABURAGS NBU 12 Bearing grease 400g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber STABURAGS NBU 12 Bearing grease 400g cartridge in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.