Explore our complete range of industrial products and equipment, from safety gear to mechanical components and tools.
Showing 9 of 895 products
Rolling bearing and high-pressure grease STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Lubricating greases with excellent wear resistance STABURAGS NBU 4, 12 are lubricating greases based on mineral oil and barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water and many diluted alkaline and acid solutions Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
STABURAGS NBU 12 K Rolling and plain bearing greases | N° 017085 STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion. Content: 400g cartridge Available in 160g cartridge , 1kg can, 25kg bucket, 180kg barrel
Long-term grease for rolling and plain bearings STABURAGS NBU 12/300 KP is a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption. STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
High-performance lubricating greases for the long-term lubrication of rolling and plain bearings Kluber STABURAGS NBU 4 MF and STABURAGS NBU 12 MF are black lubricating greases based on mineral oil for rolling and plain bearings subject to high loads. The barium complex soap thickener ensures good adhesion of the grease to the lube point and thus good resistance to moisture and aggressive media. Both greases contain special solid lubricants based on MoS2, which improve emergency lubrication properties under high temperatures or loads.and protects reliably against corrosion. Container: 400g can Available in 400g cartridge , 25kg bucket
Lubricating greases with excellent wear resistance STABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutions Content: 50g tube Available in 50g tube, 400g cartridge, 1kg can, 25kg bucket
Lubricating greases with excellent wear resistance STABURAGS NBU 12 is lubricating greases based on mineral oil and barium complex soap. This product is resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, it is resistant to corrosion, water and many diluted alkaline and acid solutions Content: 25kg bucket Available in 400g cartridge, 1kg can, 25kg bucket
Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection. With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building. Content: 400g cartridge Available in 400g cartridge, 1kg can, 25kg bucket
Petamo GHY 443 High-temperature and long-term lubricant for rolling bearings subject to high loads | N° 094052 PETAMO GHY 443 and PETAMO GHY 441 (recommended for relubrication due to its softer consistency) are special lubricating greases based on ester oil and polyurea thickener. The greases have been especially designed for the lubrication of rolling and plain bearings subject to high loads and temperatures. Being an efficient alternative to mineral oil based products, PETAMO GHY 443 and PETAMO GHY 441 achieve a much longer service life and therefore help to reduce maintenance costs. Due to their high base oil viscosity and excellent thermal stability they are mainly used for large rolling bearings. Temperature range: -20°C to +180°C Content: 400g cartridge Available in 1kg can, 25kg bucket
