A 2-part high temperature epoxy coating formulated to provide metal surfaces with erosion and corrosion protection in combination with excellent chemical resistance. Belzona 1392 (Ceramic HT2) will resist water, aqueous solutions, hydrocarbons in acid contaminated water and hydrocarbons up to temperatures of 120°C (248°F) in continuous immersion. This easy to use epoxy coating can be applied by brush or applicator eliminating the need for specialist tools and will cure at room temperature.
High temperature resistance, suitable for full immersion up to 120°C (248°F)
Excellent chemical resistance to acid contaminated water/hydrocarbon systems
Offers excellent erosion and corrosion protection
Resistant to rapid depressurisation and steam out process
Reduced health and safety risks as it is solvent-free
Simple mixing ratio
High compressive strength
Application and cure at room temperature – no hot work involved
No shrinkage, expansion or distortion
Excellent bonding to rigid surfaces including steel, stainless steel, specialist steels and others
High temperature lining for process vessels, distillation columns, heat exchangers, clarifiers and scrubber units operating under immersion
Protection of pumps, valves, hot water tanks and separators from the effects of erosion, corrosion and chemical attack
Protection of sumps and containment areas from chemical attack
Buy Belzona 1392 (Ceramic HT2) in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Belzona in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.
