ISOFLEX TOPAS NCA 5051 Synthetic long-term grease | N° 004189 ISOFLEX TOPAS NCA 5051 is a beige-coloured synthetic long-term grease which is homogenous and short-fibred. It consists of a synthetic hydrocarbon oil and a special calcium soap. ISOFLEX TOPAS NCA 5051 has a wide temperature range, is resistant to ageing and provides special corrosion protection. Its well-balanced texture and consistency ensures low and steady starting and running torques of the greased machine elements. ISOFLEX TOPAS NCA 5051 protects the friction points sufficiently from corrosion and is also suitable for plastic/steel and plastic/plastic material combinations. Temperature range: -50°C to +120°C Volume: 1kg can Also available in: 370g cartridge
Synthetic long-term grease with a wide temperature range
Especially low starting and running torque
Lubricant film spreads particularly well
Good protection against wear
Good anticorrosion properties
Resistant to ageing
Owing to its good low-temperature characteristics, ISOFLEX TOPAS NCA 5051 is used in plain bearings in the automotive industry.
It is also used to solve lubrication problems in control elements of the fuel feed and ignition system.
ISOFLEX TOPAS NCA 5051 reliably protects small adjustment gears against wear throughout their service life. It ensures constant and low breakaway torques.
The characteristics make ISOFLEX TOPAS NCA 5051 especially suitable for the lubrication of seals in pneumatic installations.
ISOFLEX TOPAS NCA 5051 is easy to apply to the lubrication point by means of a brush or a common metering device. In gears it is applied with a dip-feed system. If the product is stored for a longer period of time, oil may collect at the surface due to the soft consistency. A homogenous texture is regained by mechanical stirring.
Lower service temperature
-50 °C
Upper service temperature
120 °C
Colour space
beige
Texture
homogeneous
Density at 20 °C
ca. 0,85 g/cm³
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
ca. 30 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
ca. 5,9 mm²/s
Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C
1 – 120 corrosion degree
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating
<= 1 – 90
Buy Kluber ISOFLEX TOPAS NCA 5051 Synthetic long-term grease 1kg can in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here
Buy Kluber ISOFLEX TOPAS NCA 5051 Synthetic long-term grease 1kg can in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.
Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.
Araldite 2011 is a multipurpose, two component, room temperature curing, paste adhesive of high strength and toughness. Araldite 2011 Epoxy is suitable for bonding a wide range of materials in common use. The 2011 Epoxy is a versatile adhesive for the craftsman as well most industrial applications. Features: High shear and peel strength Tough and resiliant Good resistance to dynamic loading Bonds a wide variety of materials in common use Various sizes available
Araldite 2014-2 is a two component, room temperature curing, thixotropic paste adhesive of high strength with good environmental and excellent chemical resistance. Features: Grey Paste High Temperature Resistance Gap Filling Various sizes available
Araldite 2015 is a two component, room temperature curing paste adhesive giving a resilient bond. It is thixotropic and non sagging up to 10mm thickness. Features: Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates Gap filling, non-sagging up to 10mm thickness Good resistance to weathering Various sizes available Araldite 2015 200ml, 50ml cartridge or 2kg kit
CHARACTERISTICS: Very high shear and peel strength Extremely tough and resilient Good moisture resistance Bonds a wide variety of materials including metal, wood, rubber, glass fibre reinforced composites and many plastics
Araldite AV 4738 with Hardener HV 4739 is a two component, ambient temperature curing paste adhesive, which after post-curing either at application or in service, will give bonds with temperature resistance up to 150°C and excellent resistance to common chemicals. It is suitable for bonding a range of metals and polymeric substances such as GRE, GRP, ABS and SMC.
Araldite LY 556 is an epoxy resin that is Anhydride-cured and has low-viscosity. Supplied in various sizes.