Product Overview

Reduced maintenance due to long-term or lifetime lubrication

Reliable operation and many years of practical experience

Wide application range even with high loads

Low starting and running torques particularly at low temperatures ensure high efficiency and energy savings

Longer component life due to good wear protection

ISOFLEX TOPAS NCA 52 is used for high-speed rolling and plain bearings as well as for small gears subject to high loads. Due to the good compatibility with plastics the grease is suitable for plastic-plastic or metal-plastic material combinations. The low starting torque and the good wear protection make it an ideal grease for the long-term lubrication of linear motion guides and ball screws, e.g. in handling and automation technology.

ISOFLEX TOPAS NCA 52 can also be used for many automobile applications, e.g. for the lifetime lubrication of seat rails. It is suitable for components which have to be lubricated prior to dip painting and the drying process at peak temperatures of 180 °C as the lubricant remains at the friction point and provides reliable lubrication even after short thermal treatment.

Article number

4179

Chemical composition, type of oil

synthetic hydrocarbon oil

Chemical composition, thickener

special calcium soap

Lower service temperature

-50 °C / -58 °F

Upper service temperature

130 °C / 266 °F

Colour space

beige

Density at 20 °C

approx. 0,89 g/cm³

Worked penetration, DIN ISO 2137, 25 °C, lower limit value

265 x 0,1 mm

Worked penetration, DIN ISO 2137, 25 °C, upper limit value

295 x 0,1 mm

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

approx. 31 mm²/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

approx. 5,9 mm²/s

Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value

2 800 mPas

Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value

5 200 mPas

Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water

<= 1 corrosion degree

Copper corrosion, DIN 51811, (lubricating grease), 24h/120 °C

1 – 120 corrosion degree

Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C

<= 1 400 mbar

Speed factor (n x dm)

approx. 1 000 000 mm/min

Drop point, DIN ISO 2176, IP 396

>= 220 °C

Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.

36 months

Buy Kluber ISOFLEX TOPAS NCA 52 Synthetic long-term grease 50g tube in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE  at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber In Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here

Buy Kluber ISOFLEX TOPAS NCA 52 Synthetic long-term grease 50g tube in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, UAE at best Prices from HNA Enterprises. Ready Stock Available.

Check out our range of Kluber in Dubai, Sharjah, Ajman, Umm al Quwain, Al Ain, Ras al Khaimah, Abu Dhabi, Saudi Arabia, Qatar, Oman, Bahrain by clicking here.