Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 487 products across 23 categories
LOCTITE EA 934NA AERO, epoxy paste adhesive, two-component LOCTITE® EA 934NA AERO is a two-component thixotropic paste adhesive, which cures at room temperature and possesses superior strength to 300°F/149°C and higher. Its thixotropic nature and good compressive strength make it ideal for potting, filling and fairing, as well as for shim applications. LOCTITE EA 934NA AERO is qualified to MMM-A-132 Type 1, Class 3 with a room temperature cure.
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial relubrication of medium-speed rolling bearings subject to high temperatures and loads.
As a manufacturer or operator of modern installations operating at high temperatures, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klubersynth HBE 94-401, we offer you a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener.
Kluber Kluberplex AG 11-462 White Operating and Priming Lubricant and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components. These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.
Kluber Barrierta KM 192 High-Temperature and Long-Term Lubricants 1Kg with good resistance to low temperatures. BARRIERTA is Europe’s oldest high-quality brand of high-temperature lubricants based on perfluorinated polyether oil (PFPE). BARRIERTA KM 192 greases enable long-term use under high temperatures and the influence of media, while at the same time requiring low running torques at low temperatures.
Kluber ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.
Composite repair system, Belzona SuperWrap II, offers a new generation repair solution for restoring the strength of holed, weakened and corroded pipe and tank walls. It is comprised of a fluid-grade resin system, a bespoke hybrid reinforcement sheet, based on fibre glass and carbon fibre, as well as a release film to compact and consolidate the application. The tank and pipe repair system is available in three different resin grades, Belzona 1981, Belzona 1982 and Belzona 1983, making it suitable for applications in various climates and service temperatures ranging from -60 °C (-76 °F) up to 150°C (302°F). The Belzona SuperWrap II system is specially designed to facilitate the fast and simple, in-situ repair of through-wall and thin-wall defects on pipes and tank walls. It is a reliable alternative to welding and mitigates the need to replace defective metallic substrates, whilst providing superior strength, chemical and corrosion resistance. The tank and pipe repair kit allows for quick and easy repair of equipment within various industries, including Oil and Gas, Power Generation and Marine.
The Belzona Flange Face Forming kit is a unique repair kit developed to aid the flange face forming technology in combating the common problems with mating surfaces of flanged joints such as heat distortion, corrosion and erosion. In conjunction with Belzona 2-part epoxy repair composites such as Belzona 1111 (Super Metal) this flange repair kit provides a complete package solution which is simple to implement and cost-effective. Corrosive action of chemicals, crevice corrosion, bimetallic corrosion and high pressure steam can result in the deterioration and subsequent leakage of flanges. Proven for over 10 years, the Belzona flange face forming technology eliminates the need for conventional cut and weld methods involving hot work and allows for the simple application in emergency situations, especially in areas with limited access such as on offshore platforms. The Belzona Flange Face Forming Kit includes all the equipment required to effectively complete a Belzona flange face forming repair, eliminating the need for spare flanges of multiple sizes. It contains 6 reusable plastic formers to repair the most common flange sizes found in the industry, as well as all other necessary application tools for a quick and easy repair.
A leak-sealing kit containing a 5cm x 150cm / 2in x 60in fiberglass pre-impregnated wrap which is activated by water. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. It is odourless and very simple to apply. This material bonds well to copper, steel, SS, PVC and many other substrates. Belzona 9631 is a versatile solution for industries where quick-action pipe repairs are critical.
Explore our product categories to find exactly what you need for your industrial applications.
