Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 1432 products across 23 categories
Belzona 7211 is a three-component, 100% solids, VOC free epoxy system suitable for deep pour grouting of large machine bases, setting large levelling wedges and sole plates. It offers rapid strength development, superior creep resistance, and minimal shrinkage. This product is ideally suited for the repairs performed on horizontal surfaces where self-leveling capabilities are required. This grouting compound flows into the spaces under the large machinery and fills completely before solidifying. Belzona 7211 is offered in two different flowability levels: standard and high to meet various application requirements.
A cost-effective, 2-part, 100% solids chocking/grouting material designed to endure the physical and thermal shock common to marine environments. Belzona 7111 is pourable and is specially formulated to spread out evenly across irregular surfaces. It is ideal for pouring foundations for heavy ship propulsion systems and other heavy equipment where alignment, and anchorage are essential.
A two-part zinc rich epoxy resin designed for the coating of metallic surfaces to provide corrosion protection. This solvent based material is ideal in marine and industrial environments where long-term corrosion resistance is required. Belzona 6111 (Liquid Anode) is easy to mix and can be applied by brush or by spray without the need for specialist tools. It will cure at room temperature, eliminating the need for hot work.
A 2-part epoxy coating applied by brush or heated airless spray for corrosion protection of metallic surfaces in contact with aqueous solutions at temperatures up to 95°C (203°F). This solvent-free material offers good chemical resistance against a wide range of chemicals and protects equipment from the effects of corrosion, salt, water and environmental damage. It will cure at ambient temperature without the need for additional heat, eliminating health and safety hazards. Belzona 5892 exhibits low surface bloom and excellent inter-coat adhesion enabling 2-coat application without the need for frost blasting. It has been formulated in light colours to assist visibility and provide good inspection characteristics in poorly lit vessels. This material can also be used for the creation of irregular load bearing shims with good electrical insulation characteristics.
Belzona 5871 is a two-component, polymeric, solvent free system providing a thermal insulation barrier with corrosion protection and thermal and sub- zero “cool-to-touch” properties. This material is designed to be applied to metal pipework, ducting and other industrial equipment. Belzona 5871 is thermally insulating, providing protection against contact-burn injuries, eliminates corrosion/CUI, condensation and anti-icing, improving safety and durability. Belzona 5871 can be applied by brush, cartridge or plural spray, expanding upon application to produce a lightweight, closed-cell foam. This reduces the surface temperature of metallic substrates to below 60°C (140°F) whilst providing corrosion protection.
A solvent-free, single-component epoxy coating, which cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Belzona 5851 (HA-Barrier) can be easily applied by brush and does not require any weighing or mixing. This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation, avoiding production downtime. Once cured, it provides outstanding corrosion protection. Also available is Belzona 1251 (HA-Barrier), a heat-activated epoxy repair composite which can be used in fill pitting and bond equipment among other applications.
A solvent-free, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F – 176°F) with minimal preparation required.
Belzona 5831LT is an environmental moisture-tolerant barrier coating, specially formulated for the protection of metallic and non-metallic surfaces at lower temperatures. Similar to Belzona 5831 (ST Barrier), this coating uses moisture-tolerant technology. The product displaces surface contaminants, ensuring maximum adhesion to damp, wet or oily surfaces and underwater. This solvent-free material can be applied on to virtually any surface and is easy to apply at low ambient temperatures and on cold substrates. Belzona 5831LT will provide long-term protection against corrosion, erosion and environmental attack.
A 2-part epoxy coating which once cured forms a barrier coating for the protection of equipment operating under immersed conditions or in contact with aqueous solutions. This solvent-free epoxy coating bonds strongly to steel and other metallic and non-metallic surfaces such as concrete or brick. Belzona 5831 (ST-Barrier) is specifically formulated for application to wet and oil contaminated surfaces that cannot be dry for application, as well as for underwater applications. The coating displaces water from the surface ensuring maximum adhesion to damp or wet surfaces, even underwater.
A 2-part, epoxy-based, ceramic filled, solvent-free coating applied by brush or spray for the protection of metallic and non-metallic surfaces operating under immersion conditions in contact with aqueous solutions. Belzona 5821 provides an outstanding protection from the effects of salt, water, acids, alkalis, alcohols and hydrocarbons. The coating can be applied to virtually any rigid surface including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium.
Belzona 5813 is a solvent-free, two-component static dissipative barrier coating. This epoxy based coating system is designed to transfer surface electrostatic charge build-up away from hazardous areas. Due to its excellent static dissipative properties, Belzona 5813 helps to eliminate electrostatic charge where flammable materials are stored. Surfaces coated with Belzona 5813 prevent sparks, shorts, sudden discharge that can lead to an explosion. Belzona 5813 is easy to mix and can be applied without the need of specialists tools.
A 2-part epoxy-based system applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion conditions in contact with water and aqueous solutions when potable water approval is required. Use Belzona 5812DW in combination with Belzona 9241 aggregate to create a drinking water approved concrete rebuilding system for heavily damaged vertical and horizontal surfaces.
Explore our product categories to find exactly what you need for your industrial applications.
