Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 1432 products across 23 categories
A 2-part epoxy coating which provides outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 50°C (122°F) from the effects of corrosion. This solvent-free material can be easily applied by brush or spray to virtually any metallic and non-metallic surface, simplifying maintenance works. Belzona 5811DW2 (DW Immersion Grade) is a variant of Belzona 5811 (Immersion Grade) approved by WRAS for contact with potable water.
Belzona 5721 is a 2-component, high-performance coating, specifically formulated for protecting the leading edge of wind turbine blades from erosion and impact damage. This system is ideally suited for the rigorours of in-situ applications, being easy to apply by brush in a single coat. Together with its low-temperature cure technology, Belzona 5721 can maximise available maintenance opportunities and ensure the turbine’s fast return to service. It is also safe to use due to being cold applied without the need for specialist tools or equipment. Furthermore, the Belzona solution is 100% solids and solvent free, making it suitable for factory application.
Belzona 5711 is a high-performance, easy to apply system specially designed for the repair of erosion and impact damage on the leading edges of wind turbine blades. Belzona 5711 is supplied in a cartridge format, making it easy to apply, ideally suited for applicators using rope access. This product has a good working life allowing it to be perfectly contoured to the leading edge, removing the need for sanding eliminating a step in the repair process. Belzona 5711 cures quickly and can be directly overcoated with Belzona 5721 in 30 minutes at 20°C/68°F, without the need for any additional preparation. Belzona 5711 and Belzona 5721 provide a long-lasting repair and protection solution for your blades, minimising downtime, and maximising your turbines output.
Belzona 5233 is a waterborne, solvent-free and UV-stable floor coating. It is designed to offer long–term protection and durability for internal and external flooring applications. This system provides outstanding mechanical strength and resistance to abrasion, ideal for areas with high levels of vehicular and pedestrian traffic. Primarily, it is used in conjunction with Belzona 5231 and aggregates to create seamless, slip-resistant flooring in various facilities. Available as a grey or clear coating, Belzona 5233 is easily hand-applied by brush or roller, without the need for any specialist tools.
A 2-part epoxy coating for floor protection, which provides excellent chemical and abrasion resistance, and ensures a slip resistant flooring due to the incorporation of a durable aggregate. This solvent-free material can be easily mixed and applied by roller on a range of surfaces including concrete and steel, and will reduce downtime due to its fast-curing properties. Belzona 5231 (SG Laminate) is available in light or dark gray, or bright yellow for improved safety in potentially dangerous areas. Thanks to its low odour, this material is ideally suited to be used in places such as hospitals, schools and production facilities.
A water-repellent breathable treatment designed to protect masonry surfaces from water penetration without altering the natural appearance of the structures, as it becomes transparent when cured. This solvent-free material prevents spalling and cracking of surfaces such as concrete, stone and brick, while reducing dirt retention. It is supplied as a concentrate, which can be easily diluted on-site with water and applied by brush or spray to provide long-term protection and maintain building fabric insulation properties.
A 2-part urethane coating designed for the protection of metallic and masonry surfaces against physical, chemical and bacterial attack. This durable material is ideal where toughness, environmental, erosion and corrosion resistance are required, yet providing a highly decorative non-toxic surface which is easy to clean by commonly used cleaning agents. Belzona 5111 (Ceramic Cladding) is easy to mix and can be applied by brush or spray without the need for specialist tools. It will cure at room temperature, eliminating the need for hot work.
A fast-curing, 2-part flexible sealant designed to provide effective sealing of construction and expansion joints on concrete, stone, brick and other surfaces. This solvent-free material is a cost-effective and high performance alternative to conventional mastics and sealants, providing joints with up to 25% flexibility and outstanding weather and chemical resistance. It does not require any hot work and cures quickly, ensuring a safe and easy application
A fast-curing, 2-part flexible sealant designed to provide effective sealing of construction and expansion joints on concrete, stone, brick and other surfaces. This solvent-free material is a cost-effective and high performance alternative to conventional mastics and sealants, providing joints with up to ±12.5% flexibility and outstanding weather and chemical resistance. It does not require any hot work and cures quickly, ensuring a safe and easy application.
A two-part fluid epoxy resin designed for the creation and repair of safety grip systems on walking surfaces. Used in conjunction with Belzona Aggregates, this solvent-free material is ideal where slip reduction, adhesion, chemical or wear resistance are required. Belzona 4411 (Granogrip) is easy to mix and can be applied manually without the need for specialist tools and will cure at room temperature, eliminating the need for hot work.
A flexible, 2-part epoxy coating for the long-term protection of concrete from chemical attack. This barrier epoxy coating is ideally suited to protect secondary containment areas as it will stay intact in the event of concrete cracking underneath due to its superior flexibility and resistance to a wide range of chemicals, including acids and alkalis. Belzona 4361 is easy to mix and apply without the need of specialist tools and cures at room temperature, eliminating the need for hot work.
A high performance, 2-part, static dissipative barrier coating designed to transfer surface build-up of electrostatic charge away from hazardous areas. Furthermore, this solvent-free, conductive coating isolates concrete and metal surfaces from aggressive chemicals, especially acids and alkalis. It is easy to mix and apply without the need of specialist tools and cures at room temperature.
Explore our product categories to find exactly what you need for your industrial applications.
