Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 1432 products across 23 categories
A solvent-free, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F – 176°F) with minimal preparation required.
Belzona 5831LT is an environmental moisture-tolerant barrier coating, specially formulated for the protection of metallic and non-metallic surfaces at lower temperatures. Similar to Belzona 5831 (ST Barrier), this coating uses moisture-tolerant technology. The product displaces surface contaminants, ensuring maximum adhesion to damp, wet or oily surfaces and underwater. This solvent-free material can be applied on to virtually any surface and is easy to apply at low ambient temperatures and on cold substrates. Belzona 5831LT will provide long-term protection against corrosion, erosion and environmental attack.
A 2-part epoxy coating which once cured forms a barrier coating for the protection of equipment operating under immersed conditions or in contact with aqueous solutions. This solvent-free epoxy coating bonds strongly to steel and other metallic and non-metallic surfaces such as concrete or brick. Belzona 5831 (ST-Barrier) is specifically formulated for application to wet and oil contaminated surfaces that cannot be dry for application, as well as for underwater applications. The coating displaces water from the surface ensuring maximum adhesion to damp or wet surfaces, even underwater.
A 2-part, epoxy-based, ceramic filled, solvent-free coating applied by brush or spray for the protection of metallic and non-metallic surfaces operating under immersion conditions in contact with aqueous solutions. Belzona 5821 provides an outstanding protection from the effects of salt, water, acids, alkalis, alcohols and hydrocarbons. The coating can be applied to virtually any rigid surface including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium.
Belzona 5813 is a solvent-free, two-component static dissipative barrier coating. This epoxy based coating system is designed to transfer surface electrostatic charge build-up away from hazardous areas. Due to its excellent static dissipative properties, Belzona 5813 helps to eliminate electrostatic charge where flammable materials are stored. Surfaces coated with Belzona 5813 prevent sparks, shorts, sudden discharge that can lead to an explosion. Belzona 5813 is easy to mix and can be applied without the need of specialists tools.
A 2-part epoxy-based system applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion conditions in contact with water and aqueous solutions when potable water approval is required. Use Belzona 5812DW in combination with Belzona 9241 aggregate to create a drinking water approved concrete rebuilding system for heavily damaged vertical and horizontal surfaces.
A 2-part epoxy coating which provides outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 50°C (122°F) from the effects of corrosion. This solvent-free material can be easily applied by brush or spray to virtually any metallic and non-metallic surface, simplifying maintenance works. Belzona 5811DW2 (DW Immersion Grade) is a variant of Belzona 5811 (Immersion Grade) approved by WRAS for contact with potable water.
Belzona 5721 is a 2-component, high-performance coating, specifically formulated for protecting the leading edge of wind turbine blades from erosion and impact damage. This system is ideally suited for the rigorours of in-situ applications, being easy to apply by brush in a single coat. Together with its low-temperature cure technology, Belzona 5721 can maximise available maintenance opportunities and ensure the turbine’s fast return to service. It is also safe to use due to being cold applied without the need for specialist tools or equipment. Furthermore, the Belzona solution is 100% solids and solvent free, making it suitable for factory application.
Belzona 5711 is a high-performance, easy to apply system specially designed for the repair of erosion and impact damage on the leading edges of wind turbine blades. Belzona 5711 is supplied in a cartridge format, making it easy to apply, ideally suited for applicators using rope access. This product has a good working life allowing it to be perfectly contoured to the leading edge, removing the need for sanding eliminating a step in the repair process. Belzona 5711 cures quickly and can be directly overcoated with Belzona 5721 in 30 minutes at 20°C/68°F, without the need for any additional preparation. Belzona 5711 and Belzona 5721 provide a long-lasting repair and protection solution for your blades, minimising downtime, and maximising your turbines output.
Belzona 5233 is a waterborne, solvent-free and UV-stable floor coating. It is designed to offer long–term protection and durability for internal and external flooring applications. This system provides outstanding mechanical strength and resistance to abrasion, ideal for areas with high levels of vehicular and pedestrian traffic. Primarily, it is used in conjunction with Belzona 5231 and aggregates to create seamless, slip-resistant flooring in various facilities. Available as a grey or clear coating, Belzona 5233 is easily hand-applied by brush or roller, without the need for any specialist tools.
A 2-part epoxy coating for floor protection, which provides excellent chemical and abrasion resistance, and ensures a slip resistant flooring due to the incorporation of a durable aggregate. This solvent-free material can be easily mixed and applied by roller on a range of surfaces including concrete and steel, and will reduce downtime due to its fast-curing properties. Belzona 5231 (SG Laminate) is available in light or dark gray, or bright yellow for improved safety in potentially dangerous areas. Thanks to its low odour, this material is ideally suited to be used in places such as hospitals, schools and production facilities.
A water-repellent breathable treatment designed to protect masonry surfaces from water penetration without altering the natural appearance of the structures, as it becomes transparent when cured. This solvent-free material prevents spalling and cracking of surfaces such as concrete, stone and brick, while reducing dirt retention. It is supplied as a concentrate, which can be easily diluted on-site with water and applied by brush or spray to provide long-term protection and maintain building fabric insulation properties.
Explore our product categories to find exactly what you need for your industrial applications.
