Browse our comprehensive range of high-quality industrial products designed for performance, reliability, and efficiency across all major categories.
Showing 1432 products across 23 categories
A durable, 2-part epoxy barrier coating optimised for resistance to hot inorganic acids such as sulphuric and hydrochloric acid up to 90°C (194°F). This solvent-free coating isolates concrete and metal surfaces from deteriorating chemical environments. Belzona 4341 (Magma CR4) provides a safe and hygienic surface which meets the USDA requirements for incidental food contact. It is easy to mix and apply without the need of specialist tools and cures at room temperature.
A high performance, 2-part epoxy coating optimised for resistance to hot organic acids such as acetic acid and organic solvents up to 90°C (194°F). This solvent-free coating isolates concrete and metal surfaces from deteriorating chemical environments. Belzona 4331 (Magma CR3) provides a safe and hygienic surface which meets the USDA requirements for incidental food contact. It is simple to apply by brush in one or two coats without the need of specialist tools and cures at room temperature.
A durable, 2-part epoxy coating for the long-term protection of concrete and metal surfaces from chemical attack. This solvent-free coating isolates concrete and metal surfaces from aggressive chemicals especially acids and alkalis. It is easy to mix and apply by hand or spray without the need of specialist tools and cures at room temperature.
A durable, two-parts repair composite for long-term metal and concrete protection from a broad range of chemicals, especially concentrated inorganic acid and alkalis (e.g. nitric acid, sulfuric acid, sodium hydroxide). This paste-grade material is ideally suited for rebuilding surfaces damaged as a result of chemical attack and for the repair of damaged chemical resistant linings. It can also be used for profiling and fairing rough surfaces prior to the application of a suitable Belzona coating. This solvent-free material is easy to mix and apply without the need of specialist tools and cures at room temperature.
A 3-part epoxy repair composite designed for the repair, resurfacing and protection of concrete and stone subject to impact, abrasion, heat and chemical attack. This material provides outstanding acid and heat resistance and is ideally suited for horizontal surfaces, as well as vertical surfaces up to a thickness of 6mm (¼ inch.) Belzona 4181 (AHR Magma-Quartz) is a solvent-free repair composite which is supplied as a base, solidifier and separate aggregate, that when combined forms a trowelable consistency to rebuild damaged surfaces.
Belzona 4154 is a 2-part, multi-purpose epoxy-based repair resin suitable for the rebuilding of concrete and stonework damaged by impact, vibration, chemicals, and environmental attack. Easily combined with locally sourced aggregates, Belzona 4154 provides a highly cost-effective solution, especially for large scale applications. Belzona 4154 is ideally suited for repairs performed on horizontal surfaces as levelling material to fill large uneven areas, deep voids, gaps and cracks. This economical resin will bond strongly to most surfaces such as brick, concrete and natural stones. To ensure high performance mandated by the operating conditions, Belzona 4154 must be overcoated with one of the Belzona products best suited for the application.
A 2-part epoxy resin for concrete protection system ideally suited to surfaces exposed to chemical attack and abrasion which offers excellent resistance to a broad range of aggressive chemicals. This clear amber epoxy resin system bonds strongly to concrete, stone and other metallic and non-metallic surfaces. It provides a tough, seamless coating which is suitable for heavy duty dust proofing. Belzona 4151 (Magma-Quartz Resin) is also ideal for grouting and bonding or as an overcoat to Belzona 4111 (Magma-Quartz) and Belzona 4131 (Magma-Screed), providing an excellent sealed surface. This versatile system can also be injected to accomplish repairs such as crack stabilisation.
A lightweight epoxy repair composite for rebuilding damaged vertical and overhead concrete and masonry surfaces. This high-build concrete repair material can be applied up to 12.7 cm (5 inches) thick on vertical surfaces and up to 7.6 cm (3 inches) thick on overhead surfaces without the use of shuttering during cure and only minimal support during the application. This solvent-free epoxy repair composite is non-porous and does not absorb water or chemicals. It provides excellent carbonation resistance and withstands extreme weather conditions. Generally, concrete must be left to cure for a minimum of 28 days. Belzona 4141 (Magma-Build) in comparison will achieve a full mechanical cure at 25°C (77°F) within 12 hours, and full chemical cure in 3 days.
A non-porous, 2-part epoxy repair composite designed for resurfacing and protecting large areas of concrete, stone and many other surfaces. This solvent-free material provides excellent chemical and abrasion resistance and protection from impact and environmental attack. Far stronger than concrete, Belzona 4131 (Magma-Screed) can be used as a repair material or to provide an extra strong top layer to existing concrete areas. This simple to apply material is easy to mix and can be applied by trowel without the need for specialist tools.
A fast-curing, 3-part epoxy repair composite designed for repair, resurfacing and protection of concrete and stone. This material provides outstanding chemical and abrasion resistance and protection from environmental attack, simplifying maintenance procedures. Belzona 4111 (Magma-Quartz) is easy to mix and apply without the need for specialist tools and can be used in small quantities if required. This solvent-free repair composite is supplied as a base, solidifier and separate aggregate, allowing the viscosity of the mixed product to be varied.
A 2-part hybrid polymer coating for the encapsulation of any shape, size or configuration of flanged joint or other equipment. Designed to exclude moisture and prevent crevice, galvanic and atmospheric corrosion, Belzona 3412 is a tough, isocyanate-free, flexible topcoat which does not require heat or specialist tools for its application. Belzona 3412 can be simply applied by brush or spray to new or deteriorated equipment to provide outstanding long-term corrosion protection. When used in combination with the release agent/corrosion inhibitor, Belzona 8411, the coating can be easily cut, peeled back and resealed to allow inspection of fastenings. Additionally, Belzona 3412 can be used in conjunction with the Belzona Spray Gun. This facilitates a fast and efficient application whilst providing the same outstanding coverage and protection as a brush application.
A water-based acrylic emulsion membrane incorporating a polymer bonded glass reinforcing sheet (Belzona 9321) designed to provide seamless, flexible protection to all types of thermal insulation and cladding systems. Belzona 3211 (Lagseal) is water, weather and fire resistant, and conforms to the requirements for a ‘Class O’ surface for ‘The UK Building Regulations 1991’ and ‘Class A’ in accordance with ‘ASTM E84’. The system provides protection from water ingress whilst its microporous nature allows trapped moisture from within the insulation to evaporate. This solvent-free, single pack system requires no mixing and is simple to apply to damp as well as dry insulation.
Explore our product categories to find exactly what you need for your industrial applications.
