A 2-part epoxy resin for concrete protection system ideally suited to surfaces exposed to chemical attack and abrasion which offers excellent resistance to a broad range of aggressive chemicals. This clear amber epoxy resin system bonds strongly to concrete, stone and other metallic and non-metallic surfaces. It provides a tough, seamless coating which is suitable for heavy duty dust proofing. Belzona 4151 (Magma-Quartz Resin) is also ideal for grouting and bonding or as an overcoat to Belzona 4111 (Magma-Quartz) and Belzona 4131 (Magma-Screed), providing an excellent sealed surface. This versatile system can also be injected to accomplish repairs such as crack stabilisation.
A lightweight epoxy repair composite for rebuilding damaged vertical and overhead concrete and masonry surfaces. This high-build concrete repair material can be applied up to 12.7 cm (5 inches) thick on vertical surfaces and up to 7.6 cm (3 inches) thick on overhead surfaces without the use of shuttering during cure and only minimal support during the application. This solvent-free epoxy repair composite is non-porous and does not absorb water or chemicals. It provides excellent carbonation resistance and withstands extreme weather conditions. Generally, concrete must be left to cure for a minimum of 28 days. Belzona 4141 (Magma-Build) in comparison will achieve a full mechanical cure at 25°C (77°F) within 12 hours, and full chemical cure in 3 days.
A non-porous, 2-part epoxy repair composite designed for resurfacing and protecting large areas of concrete, stone and many other surfaces. This solvent-free material provides excellent chemical and abrasion resistance and protection from impact and environmental attack. Far stronger than concrete, Belzona 4131 (Magma-Screed) can be used as a repair material or to provide an extra strong top layer to existing concrete areas. This simple to apply material is easy to mix and can be applied by trowel without the need for specialist tools.
A fast-curing, 3-part epoxy repair composite designed for repair, resurfacing and protection of concrete and stone. This material provides outstanding chemical and abrasion resistance and protection from environmental attack, simplifying maintenance procedures. Belzona 4111 (Magma-Quartz) is easy to mix and apply without the need for specialist tools and can be used in small quantities if required. This solvent-free repair composite is supplied as a base, solidifier and separate aggregate, allowing the viscosity of the mixed product to be varied.
A 2-part hybrid polymer coating for the encapsulation of any shape, size or configuration of flanged joint or other equipment. Designed to exclude moisture and prevent crevice, galvanic and atmospheric corrosion, Belzona 3412 is a tough, isocyanate-free, flexible topcoat which does not require heat or specialist tools for its application. Belzona 3412 can be simply applied by brush or spray to new or deteriorated equipment to provide outstanding long-term corrosion protection. When used in combination with the release agent/corrosion inhibitor, Belzona 8411, the coating can be easily cut, peeled back and resealed to allow inspection of fastenings. Additionally, Belzona 3412 can be used in conjunction with the Belzona Spray Gun. This facilitates a fast and efficient application whilst providing the same outstanding coverage and protection as a brush application.
A water-based acrylic emulsion membrane incorporating a polymer bonded glass reinforcing sheet (Belzona 9321) designed to provide seamless, flexible protection to all types of thermal insulation and cladding systems. Belzona 3211 (Lagseal) is water, weather and fire resistant, and conforms to the requirements for a ‘Class O’ surface for ‘The UK Building Regulations 1991’ and ‘Class A’ in accordance with ‘ASTM E84’. The system provides protection from water ingress whilst its microporous nature allows trapped moisture from within the insulation to evaporate. This solvent-free, single pack system requires no mixing and is simple to apply to damp as well as dry insulation.
Designed for application in all weather conditions, this cold-applied liquid coating offers long-term repair and protection to all types of roofs. The moisture-activated urethane roof coating, Belzona 3131 (WG Membrane), bonds strongly to all types of roofing materials and will not be damaged by rain even immediately after application. The applied system incorporates a reinforcement sheet to allow the easy control of the coating thickness during application and it adapts to roof movement due to its outstanding elasticity.
A 2-part polymer composite designed to provide emergency roof repair and weatherproofing for leaking roof areas. Belzona 3121 (MR7) is liquid-applied and bonds strongly to all common roofing surfaces including slate roofs, tile roofs, asphalt, felt, asbestos cement sheet roofs and metal roofs, even during adverse weather conditions. This fast-curing, all climate flexible repair system incorporates a reinforcement sheet which ensures the coating will adapt to roof movements and follows complex roofing contours. This system is water resistant immediately after application and can cure even if fully immersed in water.
A cold-applied liquid coating for long-term roof protection, providing outstanding waterproofing and weatherproofing properties. This single-component, water-based roof coating will bond strongly to all types of roofing materials, following even complex roof contours, and will allow the surface to breathe due to its microporous structure. The applied system incorporates a reinforcement sheet to allow an easy control of the coating thickness during the application as well as adapting to roof movement due to its outstanding elasticity. This water-based material can be applied on almost any location including schools, hospitals and public buildings thanks to its low odour. It is certified by Energy Star and ETA-Danmark (European Technical Assessment) and has proven to provide excellent protection of roofs for in excess of 25 years.
