Adhesives and lubricants aid in bonding and friction reduction. They are vital in mechanical assemblies, maintenance, and industrial operations.
Showing 9 of 487 products
High-temperature long-term greases Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads. Content: 10kg bucket
Klubertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177 Klubertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener. The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klubertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials. Content: 10kg bucket
Multi-purpose lubricant for high-temperature applications Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE). Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications. Content: 10kg bucket Available in 800g cartridge, 1kg can
Multi-purpose lubricant for high-temperature applications Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE). Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications. Content: 10kg bucket Available in 800g cartridge, 1kg can
Multi-purpose lubricant for high-temperature applications Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE). Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications. Content: 10kg bucket Available in 800g cartridge, 1kg can
Kluber Klubersynth PEG 46-121 Special grease for the lubrication of enclosed gear drives | N° 027041 Synthetic polyglycol oil-based special grease with NLGI grade 1 Temperature range: -50°C to +120°C Volume: 1kg can Also available in 25kg bucket, 180kg drum
Kluber Klubersynth LI 44-22 is a fully synthetic, dynamically light low-temperature grease with good damping and adhesion properties as well as water resistance. It is based on synthetic hydrocarbons, lithium soap, antifriction solid lubricants as well as corrosion and oxidation inhibitors. It is almost neutral towards many plastics and elastomers.
Synthetic heavy-duty grease for long-term lubrication As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klubersynth HBE 94-401 we offer you a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are your components subject to strong oscillations? With its very good antiwear properties, Klubersynth HBE 94-401 meets this challenge too. Content: 1kg can Available in 400g cartridge, 1kg can, 25kg bucket
Klubersynth BQP 72-82 Rolling bearing grease for long-term lubrication | N° 094116 Klubersynth BQP 72-82 is designed for small rolling bearings in which material fatigue due to vibration in combination with pressure and temperature can occur. It is based on ester oil and polyurea thickener and made according to a special manufacturing procedure, facilitating smoother running of rolling bearings. With its above-average corrosion protection properties, it also extends the lifetime of rolling bearings. Temperature range: -40°C to +180°C Volume: 1kg can.
